Beginners • Re: Problems Installing Software
Also make sure nothing else is using dpkg like packagekit.How would I do that?I fumbled my way to a solution and ended up installing the software from the GUI, as was suggested a few messages up. Much...
View ArticleTroubleshooting • Re: Boot to USB3 with SATA adapter PA023U3
@peterlite: here’s my quirks lineCode: cat /boot/firmware/cmdline.txtusb-storage.quirks=7825:a2a4:u,152d:0578:u,152d:1561:u console=serial0,115200 console=tty1 root=PARTUUID=d38551dd-02...
View ArticleBeginners • Re: Raspberry Pi 5 - Unable to boot from NVME
for the pi4 and pi5(when not using flashrom mode), the new eeprom image is put onto the fat32 partition, and the whole system is rebooted (clearing the cache)flashrom reports sucess.flashrom mode lets...
View ArticleRaspberry Pi OS • Re: Request for Kernel Headers for Raspberry Pi OS Kernel...
Thanks for your reply;its bullseye 11 , i upgraded it to latest one.Statistics: Posted by prafulchavan — Mon Nov 04, 2024 5:01 am
View ArticleTroubleshooting • Re: USB ports not working after reinstall to newest Booworm
This works OK for me on a Pi3+ running latest Bookworm 64-bit with all updatesArduino UNO connected to USB port running a sketch that sends incrementing text (0.00, 0.10, ) over USB...
View ArticleAndroid • Re: Android 15 for Raspberry Pi 5 by emteria
You say SD card?Can Android 15 or 14 be installed right to an NVME drive?With the HAT+ M.2 out it would a great fit.Thanks,Sorry, wasn't the last line in emteria's post?Have questions, ideas, or just...
View ArticleDeutsch • Grafische Oberfläche auf default zurücksetzen?
Moin zusammen,ich habe die Tage meinen Pi4B Updated/Upgraded.Danach sah die Oberfläche kaputt aus. Dann hab ich mit Hilfe von Google versucht das zu reparieren, hat aber nichts geklappt (z.B. auch...
View ArticleGeneral • Re: Specify buffer allocation in specific memory banks
RP2040 has special address range for defining blocked vs stripped addressing. When using blocked addressing you can use standard C sections. The multicore API allows moving the core 1 stack. You can...
View ArticleRaspberry Pi OS • Re: Firefox labwc issue
Out of curiosity: Have you tried resetting your locale after changing to labwc?I found that, after changing to labwc, I had to reset my locale settings to en_AU as the system had defaulted back to...
View ArticleDeutsch • *SOLVED* Re: Grafische Oberfläche auf default zurücksetzen?
Das Hauptproblem hat sich erledigt.Google und ChatGPT konnte mir (damals) nicht helfen. Co-Pilot konnte mir nach dem dritten Anlauf helfen:Entfernen Sie alle aktuellen Desktop-Umgebungen:Code: sudo...
View ArticleRaspberry Pi OS • Re: Wrong kernel version in uname
If a normal Debian dist-upgrade is done, so changing bullseye to bookworm in sources.list(.d), you manually need to add/install the new bookworm firmware and kernel. It are new package names and the...
View ArticleTroubleshooting • DHT 11, not working how I need it to work
Hello everyone! I'm currently working on a project using a DHT11 sensor to measure temperatures on a Raspberry Pi (model 3 B v1.2).Initially, I tried installing the Adafruit DHT library, but I ran...
View ArticleClik here to view.
General • Re: Pico burnt after a few minutes , why ?
It reminds me of MC34063. I tried make one or two MC34063 power boards a long time ago, but gave up after buck or boost boards became widely available. Compared to modern switchers, I might call them...
View ArticleRaspberry Pi OS • Re: Labwc: Panel shortcuts of desktop files with hardcoded...
This has been fixed with the latest update.Statistics: Posted by apandada1 — Tue Nov 05, 2024 3:46 am
View ArticleTroubleshooting • Labwc no interlaced resolutions
When I use labwc over HDMI with my 1080i TV, it only shows the 480p resolutions. When I use it over composite, only the progressive scan resolutions are available as well. I read that the Raspberry Pi...
View ArticleGeneral discussion • Raspberrypi Logs out
My rpi is connected headless. Recently I noticed when connecting with vnc I see login screen. I change the setting autologin in raspi-config already. Still the same. Any help is appreciatedStatistics:...
View ArticleClik here to view.
Beginners • pin planner spreadsheet for rp2350
Hi,I looked around for one, but couldn't really find one, so I created my own pin planner for my Raspberry Pi pico 2 project.I have the one I'm using for my 3 sonar project...
View ArticleTroubleshooting • Re: DHT 11, not working how I need it to work
I have this DHT22 code that works, I started with DHT11, so if my memory is right you only need to change DHT22 to DHT11. It's based on micropython which has the dht...
View ArticleBeginners • Re: Making a desktop alias/program for an "sh" command
I didn't get a reply to my request for more specific direction, so I have been studying a bit, and while I have learned some things (about shebang, for instance), I am still not sure how to write this...
View ArticleGeneral • Re: Multicore access to global variables
The RP235x has mutex support in assembly, while RP2040 does not. That is technically unrelated to instruction interpretation.I should also clarify a possible implication of my previous comment:The...
View Article