Beginners • Re: Most cost effective way to add SSD to Rasp Pi 4B
If you are UKKingston A400 120GB SSD for about £10USB3 to SATA Adapter eg https://thepihut.com/products/ssd-to-us ... spberry-piNote that some USB3 to SATA adapters don't work with Linux (try to...
View ArticleTroubleshooting • Re: HDMI issues with new Pi5 8gb
When I put the SDCard with this code in a Pi4, I always get a correct list of modes and EDID. Is the i2c interface different between Pi5 and Pi4?Possibly. There was a recent bug fix to reduce the I2C...
View ArticleClik here to view.
Troubleshooting • RaspPi 5 / Beginner/ Can't log-in anymore
Hello everyone,I'm a beginner and installed the RaspberryPi 5 (Bookworm) 2-3 days ago. Everything has run without any problems so far. After I downloaded everything under 'Recommended Software' this...
View ArticleTroubleshooting • Re: Raspberry Pi 4 does not boot, both LEDs do not blink,...
https://gifs.cackhanded.net/star-trek/w ... s-dead-jimStatistics: Posted by drgeoff — Fri Feb 23, 2024 2:39 pm
View ArticleDevice Tree • Re: Can a rotary encoder generate keyboard events?
A casual search brought up this:https://github.com/JamesGKent/rotary_volumeWhich I found from here:https://lektiondestages.art.blog/2020/0 ... -overlays/Which implied that you could just capture the...
View ArticleTroubleshooting • Re: Wayland: Switchind display off and on again is not working
you're on an older kernel than me.You can simply use another uSD, copy your existing setup by using SD card copier app and the update to the latest kernel (which might solve the issue) by running...
View ArticleFrançais • Re: gpio c++
donc avec :temperatureUnit\u00E9Int = "dans le terminal de geany temperatureUnitéInt =et dans lxterminal (.local/bin/gainable)temperatureUnitéIntStatistics: Posted by ludoraspberry — Fri Feb 23, 2024...
View ArticleTroubleshooting • Re: Stuck at poweroff
Indeed! The behavior makes sense now in light of the fact that I had a typo in calling another overlay which was to give the subsequent instruction the system was waiting for. Thank you for your...
View ArticleTroubleshooting • Extremely slow VNC response in Chromium - Bookworm...
Hello all, I am a Raspberry newbie. I have previously worked with a headless Raspberry 4 running Bullseye and was using RealVNC. There is a well documented problem in that scenario, where certain apps...
View ArticleOfficial Display • Cannot power up the display via GPIO pin #2 and #6 from PI5
I am using the 7" official display with Pi4 by supply power to the display via the GPIO pin from the Pi4. Now I try to change the Pi4 to Pi5. But the display can't power up. I resume back to the Pi4,...
View ArticleBeginners • Re: I have raspberry pi OS already preinstalled on a microsd...
This is the guide to getting started https://www.raspberrypi.com/documentati ... arted.htmlI usually connect my Pi zero to the WiFi in the house, not to a desktop PC.The microSD card goes in the Pi...
View ArticleOfficial Display • Re: Cannot power up the display via GPIO pin #2 and #6...
Are you using the latest Pi OS Bookworm 64bit fully updated?A 3A power supply may not be enough for Pi5 and display!Statistics: Posted by rpiMike — Sat Feb 24, 2024 12:51 pm
View ArticleRaspberry Pi OS • Re: RealVNC Cloud Connection
Have you tried the workaround suggested by RealVNC - switch to X11 ? https://help.realvnc.com/hc/en-us/artic ... tement-0-0See also viewtopic.php?t=358458Statistics: Posted by neilgl — Sat Feb 24,...
View ArticleClik here to view.
Français • Re: Dashboard auto - Système dédié
Bonjour,Merci pour ta réponse,Et désolé pour le délai de retour, mais j'attendais une bonne alim pour essayer.Par contre j'ai tapé la première ligne de commande puis reboot et le raspberry reste sur...
View ArticleTroubleshooting • Re: Raspberry pi 5 reboots when close softwares
I would use Raspberry Pi Imager to write Raspberry Pi OS with desktop Bookworm 64-bit to a separate microSD card and boot from that. Check that right clicking files (or other included apps) does not...
View ArticleClik here to view.
Troubleshooting • Re: RPi5 shuts down after 15 seconds
Noticed that the board becomes very hot just below the cpu. If I remove the cooler, then it only stays on for 5 seconds.So I think it is a heating issue.I noticed that one of the capacitors are a bit...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: Raspberry Pi 5 and 6 SPI screens
Amazing, we got it to work on 1 display but are now figuring out how to do it on two or more. and above post will help. On to it upcoming week again. Thank you so much so far!Statistics: Posted by...
View ArticlePython • Re: Python library for nRF24L01 modules.
Thank you for your help. I will try that. I was a bit reluctant to try VENV because I didn't quite understand it, but I'll go down that road and see where it gets me. Thanks again!I wasn't suggesting...
View ArticleSDK • Re: is there a list of API functions, which are safe to call from...
Oh I like this question/point. I would recommend using deferred interrupt processing. This generally requires an operating system which can be somewhat taxing in terms of resources. I would also avoid...
View ArticleBeginners • Boot order change
Hi all,I've got an rp5 with piOS on SD, and a batocera image running on usb ssd.In piOS, I ran raspi-config and changed boot order to usb.Simple question really, now I'm in batocera and I can't seem...
View Article