It sounds like either the USB port was not able to provide enough current or the voltage drop on the USB-C cable was too high.
If you have any peripherals or even fans connected to the CM5IO board then I recommend using a powered hub and a short, good quality USB-A to C cable between the hub CM5IO board.
For predictability / commercial usage a Raspberry Pi4 or Raspberry Pi5 are the best choices for rpiboot host.
https://www.raspberrypi.com/products/usb-3-hub/
If you have any peripherals or even fans connected to the CM5IO board then I recommend using a powered hub and a short, good quality USB-A to C cable between the hub CM5IO board.
For predictability / commercial usage a Raspberry Pi4 or Raspberry Pi5 are the best choices for rpiboot host.
https://www.raspberrypi.com/products/usb-3-hub/
Statistics: Posted by timg236 — Mon Dec 16, 2024 2:42 pm