Raspberry Pi OS • Re: Running Bookworm Lite on RPiZ2 W - Scrot not working
Apologies forgot to add i am on the latest version of Bookworm 64 bit with all upgrades applied.Statistics: Posted by ejwjohn — Sun Dec 15, 2024 2:02 pm
View ArticleCompute Module • Re: CAM1 not working on a CM4 + CM4 io board
Look at your overlay if it has a 'CAM1' parameter. As you seem to be using your own - because there is no official one for IMX298 - you're on your own.Official overlays default to cam1 anyhow and only...
View ArticleTroubleshooting • Raspberry Pi-5 Memory allocation is not changing
I am trying to change cma and gpu memory allocation to 256M. Below are my config.txt and cmdline.txt files details. After amending these files allocation is not changing. Please helpsudo nano...
View ArticleCamera board • Re: "Or Better"?
Well, with this recent install of Raspberry PI OS (Raspberry Pi OS Lite / Release date: November 19th 2024), the last 3 months of work just went down the drain. And, I tried reinstalling the October...
View ArticleGeneral discussion • Re: New Raspberry Pi Products
There are lots of things one can connect to the GPIO header that would fail emission tests.Hence FCC 15.23 part b(b) It is recognized that the individual builder of home-built equipment may not...
View ArticleClik here to view.
Automation, sensing and robotics • Re: Emulate Mouse For 5B
Windows 11 Pro has both RDP and VNC built in, for VNC you have to go into an advanced Windows Options menu iirc.Are you sure that VNC is built into W11 Pro? I don't see how to enable it anywhere on my...
View ArticleRaspberry Pi OS • Re: How to make sure power down never results in corruption?
as neilgl said, you can use the Overlay file system.preferences - raspberry pi configuration - performanceturn on the overlay file system. Basically, makes the SD card read only.the issue is you dont...
View ArticleClik here to view.
Camera board • Re: Sawtooth Pattern in Dark Current Readings
The sawtooth still appears, however due to the lower gain it only affects exposures over about 70s at room temperature.Statistics: Posted by DanielDC88 — Sun Dec 15, 2024 2:59 pm
View ArticleCamera board • Re: Making vflip and hflip perminent setting
Hello,I decided to go with your Code selection.I added those 2 lines towards the end of the config.txt file, and rebooted the RPiZero but alas no change the image was still "upside" down with the...
View ArticleRaspberry Pi OS • Re: Samba problem with mounted directory
Dunno. hortimech might but no idea when/if he'll see this thread.Well, I have seen it, but what I haven't seen is the output of:Code: testparm -sSamba will only share (it doesn't 'export') something...
View ArticleCompute Module • Re: CM4 Module / MMC booting issue
Sorry, but how do you boot an eMMC CM4 from uSD? Which interface did you connect the uSD card to?uSD card slot on the CM4IO is to be used with CM4 lite versions only.Statistics: Posted by...
View ArticleCamera board • Re: Setting correct display when using rpicam whilst using RPI...
I might be getting a bit confused about what you're trying to do. I think I'm right in saying that you would need your remote Pi to be running the GUI desktop in order to see the camera images...
View ArticleCompute Module • Re: CM5 and Mac OS Issues
It sounds like either the USB port was not able to provide enough current or the voltage drop on the USB-C cable was too high.If you have any peripherals or even fans connected to the CM5IO board then...
View ArticleTroubleshooting • Re: Power not capable supplying 5A w/Sound Level sensor?
might be old, but:https://learn.adafruit.com/scanning-i2c ... spberry-piStatistics: Posted by terribleted — Mon Dec 16, 2024 2:43 pm
View ArticleGeneral discussion • Re: Suggestions for a Raspberry Pi Project with Wireless...
You can probably rule out using BlueTooth, as it's range is rather limited.Statistics: Posted by W. H. Heydt — Mon Dec 16, 2024 2:48 pm
View ArticleRaspberry Pi 400 and 500 • Re: Pi 500 build problems
I also have an issue with the power light. I can’t find a documentation on it, but it seems to go out at random for periods, flicker or turn of then randomly come back on, like it’s not mounted right....
View ArticleTroubleshooting • Re: USB gadget on a Zero W, what I'm missing
To activate raspberrypi.local you need two things:1. The hostname to be "raspberrypi"2. avahi-daemon running and broadcasting your *.local nameStatistics: Posted by DougieLawson — Mon Dec 16, 2024...
View ArticleDeutsch • Re: Shelly Datensammlung via Webserver
https://shelly-api-docs.shelly.cloud/ge ... y-overviewReicht das nicht als Info?Statistics: Posted by aBUGSworstnightmare — Mon Dec 16, 2024 2:57 pm
View ArticleAdvanced users • Re: MCP23017 overlay error -EIO: can't write IOCON 32
I'd misread the schematic. You've got a DPI display attached, so you can't use i2c-1 on GPIOs 2&3. The buildroot must have configured a bit-bashed I2C bus on GPIOs 10 &...
View ArticleRaspberry Pi OS • Re: is there a backup utility for Raspbian Bullseye?
RonR's image-utils are the obvious solution for a complete image that can be restored from the img file or can be mounted to access individual files viewtopic.php?t=332000However if its known files in...
View Article